Si además quieres enviarnos un Artículo para el Blog y redes sociales, pulsa el siguiente botón:
IGEP Modules están aquí
IGEP Module OMAP3530 - 720Mhz
* OMAP3530@720Mhz
* 512 Mbytes Mobile DDR @ 200Mhz
* 512 Mbytes OneNand Flash
* IEEE 802.11b/g 2,4GHz, BLUETOOTH 2.0
* On board microSD slot
* On board USB 2.0 OTG miniAB socket for power and data
* On board USB 2.0 Host interface
Para la IGEP V2 o para el módulo pequeño? Entiendo que este último, no? Especificaciones?
Para el módulo pequeño, IGEP Module.
What we'd like to do is a really simple breakout board but that can take care of the basics (which can be quite annoying if not dealt with). Our goals are:
.. 1- Onboard power regulator (possibly 3 levels: 5V and 3.3V common rails for perpherals, and ~4V to power the board).
.. 2- Logic Level Conversion on the UARTs (there are 2 and 3rd for debugging I think) from 1.8V to 3.3V or 5V (it would be nice if it was 3.3-5V tolerant).
.. 3- Voltage drop on the Analog pins to use analog sensors
.. 4 (OPTIONAL?): Level conversion on the PWM pins and I2C pins
.. 5 - Breaking out any remaining pins that may be of interest (without any level shifting at this point). The connectors can be used to expose Ethernet, Audio In and Out and a number of other things.
En el enlace que puse al foro de Robosavvy hay más detalles
